BUNDLING THE OBJECT FACADE AND WALL MATERIALS
Procurement of roofing materials
FACADE AND WALL MATERIALS
Order a miscalculation
WIDE ASSORTMENT OF RAW MATERIAL OF EUROPEAN PRODUCERS
Center of Frame Construction provides a wide range of materials for the installation of ventilated facade systems, which are made from high-quality raw materials from leading European manufacturers.
CKS guarantees a comprehensive solution - from technical advice, the development of an individual project to the manufacture and installation of facade and wall materials.
Advantages of cooperation with CKS
- INDIVIDUAL APPROACH to each client
- wealth of experience professional company with experience of 17 years
- NON-STANDARD SOLUTIONS possibility of non-standard solutions and much more
- OPTIMAL PRICE providing a full range of services at the best price
- WIDE RANGE OF manufactured and sold products
WALL AND FACADE MATERIALS
Wall sandwich panels
Order a miscalculationPrefabricated sandwich panels
are supplied ready for installment and can be easily assembled and transported.
CKS offers a wide selection of sandwich panels at the best value for money. They are produced by the following manufacturers - Ruukki, Kingspan, Termobud.
Possible types of fillers are polyurethane foam, polystyrene foam, basalt fiber, IPN and PIR..
Field assembled sandwich panel
Sandwich panels of “sheet-by-sheet” method of assembly are distinguished by the fact that they are assembled from the necessary elements during the installation of the roof.
The advantage of this type of sandwich panel is a lower cost (compared to prefabricated sandwich panels) as well as the possibility of combining the exterior and interior finish of the building, depending on the requirements of the customer.
- - a load-bearing transom system,
- - a thermal insulating material,
- - a heater,
- steam and wind protective films
- an inner and outer finishing.
As a heater, CKS uses products manufactured by Isover, Rockwool, TechnoNicol. As for exterior and interior finishing, materials are produced by the manufacturer Ruukki. .
As substructures for the installation of facades, CKS uses the aluminum subsystem of the manufacturers U-kon and Zenit. . If it is necessary to reduce the cost of the system, galvanized profiles with a thickness of 1 to 2 mm are used.
Qualified employees of CKS will advise you, starting with the selection of materials, up to the implementation of your project.
WE WILL DEVELOP DESIGN DOCUMENTATION, PROVIDE SUPPLY AND ASSEMBLY WORK
FACADES FROM COMPOSITE MATERIALS
Order a miscalculationAluminum composite panels - consist of two aluminum sheets (thickness from 0.2 to 0.5 mm), between which a polymeric layer is thermally pressed.
The design is covered with a polymer coating (PVDF, PVDF2, polyester). Aluminum composite panels have rigidity, resistance to impact, mechanical damage, pressure, and at the same time easily transformed from a flat sheet into any shape.
The use of aluminum composite panels for facades allows solving architectural tasks of any complexity, for example, facing radius surfaces. ZKS company offers aluminum-composite panels of Alufas, PANABOND, REYNOBOND trademarks..
As a subsystem to which aluminum composite panels are mounted, CKS uses the aluminum subsystem for mounting hinged facades of the manufacturers U-kon and Zenit. . If it is necessary to reduce the cost of the subsystem, galvanized profiles are used with a thickness of at least 1.2. mm. In this case, the installation of dielectric inserts that prevent electro-corrosion is required.
Milling and manufacturing of facade elements (cassettes) is carried out on the stationary equipment of the company with numerical program control. Years of experience and high qualification of CKS employees. the use of materials and components from leading European suppliers, serve as a guarantee of the quality and reliability of CKS facilities..
Modern technologies in the design of facades reveal great opportunities for the implementation of the ideas of architects.
As a facing material for monofasades, CKS offers steel, aluminum sheets, and porcelain stoneware.. Steel sheets are mainly used in the construction of buildings with increased requirements for fire safety.
The facade of steel sheets differs in an economical cost and good characteristics: it is durable and resistant to mechanical damage, it withstands extreme temperature changes, is resistant to rain and strong wind, and is environmentally friendly.
- - profiled (steel sheet thickness from 0.5 to 0.7 mm)
- - steel panels (steel sheet thickness from 0.7 to 1 mm)
- - steel cassettes (steel sheet thickness from 1 to 1.5 mm)
Combining of these variants gives an wide opportunity to realization of any architectural decisions.
A galvanized profile with a thickness of 1 to 2 mm serves as a subsystem for mounting monofasades from steel sheet..
The profile configuration, section and installation step is determined by the calculations that are carried out by the specialists of the СKS company during the project development.
Aluminum facades
Aluminum facades have a fairly wide scope of application due to high corrosion resistance, strength and lightness.
The thickness of the aluminum sheet used for cladding facade from 1.2 to 1.5 mm. Additionally, aluminum sheet is coated with a polymer coating PVDF, PVDF2, polyester).
Various profile systems allow you to make and implement any projects of the aluminum facade.
FACADES FROM CERAMOGRANITE (Porcelain tile)
Porcelain stoneware has excellent performance and attractive appearance.
The porcelain stoneware facade is characterized by hardness, wear resistance, low water absorption, high resistance to aggressive media, and vandal resistance.
The thickness of manufactured tiles of porcelain tile is from 7 to 20 mm, for cladding of a ventilated facade the most popular are slabs 10-14 mm thick. Depending on the wishes of the customer and the requirements for the facade, The company CKS offers porcelain tiles from various manufacturers.
